Maxx GW4100: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
| Zeile 13: | Zeile 13: | ||
=Interfaces= | =Interfaces= | ||
The following section describes the various interfaces of the GW4100 in detail. This graphic shows the distribution of the interfaces: | |||
((ABB)) | |||
==Pinout RS232, RS485, CAN-Bus, 1-Wire connector== | ==Pinout RS232, RS485, CAN-Bus, 1-Wire connector== | ||
==Pinout Digital IN/OUT connector== | ==Pinout Digital IN/OUT connector== | ||
Version vom 25. Februar 2021, 11:44 Uhr
The Device
Linux login
Per default login to the Linux system is possible by the use of a ssh connection on eth0 or via the serial console on the RS232 interface (115.200 baud, 8N1).
login: root
password: root
Please be advised to at least change the password and deactivate the serial console before deploying the device. The use of further security measures (PSK etc.) is strongly encouraged.
Interfaces
The following section describes the various interfaces of the GW4100 in detail. This graphic shows the distribution of the interfaces:
((ABB))