Maxx GW4100: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Keine Bearbeitungszusammenfassung |
|||
| Zeile 1: | Zeile 1: | ||
<languages/> | <languages/> | ||
== | =The Device= | ||
==Linux login== | |||
Per default login to the Linux system is possible by the use of a ssh connection on eth0 or via the serial console on the RS232 interface (115.200 baud, 8N1). | |||
login: root | |||
password: root | |||
Please be advised to at least change the password and deactivate the serial console before deploying the device. The use of further security measures (PSK etc.) is strongly encouraged. | |||
=Interfaces= | |||
==Pinout RS232, RS485, CAN-Bus, 1-Wire connector== | |||
Version vom 25. Februar 2021, 11:13 Uhr
The Device
Linux login
Per default login to the Linux system is possible by the use of a ssh connection on eth0 or via the serial console on the RS232 interface (115.200 baud, 8N1).
login: root
password: root
Please be advised to at least change the password and deactivate the serial console before deploying the device. The use of further security measures (PSK etc.) is strongly encouraged.