Maxx GW4101: Unterschied zwischen den Versionen
| Zeile 78: | Zeile 78: | ||
==Digital inputs== | ==Digital inputs== | ||
The following diagram shows the internal design of the four digital inputs: | |||
==Isolated inputs== | ==Isolated inputs== | ||
==Isolated outputs== | ==Isolated outputs== | ||
Version vom 3. März 2021, 16:26 Uhr
the device
The programmable maxx GW4101 mobile communication gateway for industrial applications collects and processes the information from your devices, machines and sensors, and transmits it via the expanded LTE network. The sensor interface expansion enhances the basic unit with interfaces for PT100/1000 temperature sensors and the widely used 4 – 20 mA current loop interface, as well as other digital inputs and outputs. The maxx GW4101 gateway is therefore ideal for transmitting measurements from the field to the head office or the cloud.
Interfaces
Pinout RS485 isolated
Pinout digital IN/OUT
Pinout 4-20mA IN/OUT
Pinout RTD
RS485
An isolated RS485 interface is available as /dev/ttymxc1. The interface includes a switchable termination resistor.
The termination resistor is enabled by driving RS485_TERM_EN high.
Analog inputs
The GW4101 offers connection options for up to four resistive thermal devices (RTD, e.g. PT100/PT1000) and up to four 4-20mA current loop inputs.
Internally an Texas Instruments ADS1220 16-bit ADC ist used. On the Linux side the ADC is accessible via SPI bus.
The cost effective measurement circuit uses a single ADC which is multiplexed to the different measurement channel. To select a channel as well for RTD as also for loop current measurement the channel number (0-3) has to be written to RTDSEL[1..0].
RTD
The following picture shows a simplified schematic of the ratiometric measurement circuit to determine the actual resistive value of the RTD devices.
4-20mA current loop inputs
The measurement of the four loop currents is done one channel at a time by the means of a shunt resistor. The GW4101 provides a per channel current limited (30mA) 24V power supply for easy connection of external sensors.
4-20mA current loop output
The device features a 4-20mA current loop output with integrated loop supply voltage. It is internally realized using a Microchip MCP4716 10-bit ADC with I2C interface.
The following diagram shows the internal architecture of this output.
Digital inputs
The following diagram shows the internal design of the four digital inputs: